Enclosure only(For 150 VDC charge controllers and 600 VDC grid tie inverters)Gray aluminum type 3R rainproof enclosure with deadfront, will accept three 150VDC (MNEPV) breakers or two touch-safe fuse holders. Attachment FrontBack03...

Goes with MNTS fuse holder. The fuses are industry standard 10mm x 38mm fuses.   Attachment Midget_datasheet.pdf

MidNite's breakers are rated to break the full rated load at the rated voltage repeatedly, with NO DAMAGE. Always use a properly sized breaker for disconnecting. Environmental Rating - Type 1 (Indoor) DC Voltage Rating - 150VDC Wire Size Range - 14...

MidNite's breakers are rated to break the full rated load at the rated voltage repeatedly, with NO DAMAGE. Always use a properly sized breaker for disconnecting. Environmental Rating - Type 1 (Indoor) DC Voltage Rating - 150VDC Wire Size Range - 14...

All MidNite circuit breakers can be used at 100% rated current when mounted in a MidNite enclosure.Breaker Torque Value: 15 Ft-Lbs (20.4NM) Environmental Rating - Type 1 (Indoor) 125VDC Panel Mount Breaker - 3/8" studs 1.5" AIC 50,000 at...

All MidNite circuit breakers can be used at 100% rated current when mounted in a MidNite enclosure.Breaker Torque Value: 15 Ft-Lbs (20.4NM) Environmental Rating - Type 1 (Indoor) 125VDC Panel Mount Breaker - 3/8" studs 1.5" AIC 50,000 at...

MidNite's breakers are rated to break the full rated load at the rated voltage repeatedly, with NO DAMAGE. Always use a properly sized breaker for disconnecting. Environmental Rating - Type 1 (Indoor) DC Voltage Rating - 150VDC Wire Size Range - 14...

MidNite's breakers are rated to break the full rated load at the rated voltage repeatedly, with NO DAMAGE. Always use a properly sized breaker for disconnecting.MNEPV breakers are the same as CBI QY breakers except the standard used is inadequate for the...

MidNite's breakers are rated to break the full rated load at the rated voltage repeatedly, with NO DAMAGE. Always use a properly sized breaker for disconnecting.   Attachment   CA1-X0-17-767-321-L.pdf Carling_A-DTime-Delays...

50mV/500amp includes taptite mounting screws. Has two 8-32 tapped holes on one end to attach a bus bar. This is the industry standard shunt.

The Deltec shunts are calibrated with an accuracy of +/- 0.25%.This is the 1000 amp 100 miV shunt, It is larger in size than the 500 amp shunt so items like the WBjr will not directly fit this shunt. the bolt size is 1/2 inch. Radian uses a 1000 amp...

The MidNite Solar 600V Surge Protector Device (MNSPD) is a Type 1 device per UL1449 rev3 and has an outdoor rating of 4X for outdoor use. Protection for grid-tie PV combiners and inverter input circuits.  Attachment SPD_Installation_Manual...