Ring terminals on wire are required. Use these breakers for DC protection in OutBack FLEXware enclosures, and MidNite E-panels when equipped for the Apollo T-80 controller. Stud size is 1/4" on 80A and smaller, 5/16" on 100A and 125A and 3/8" on 175A and...

OutBack Power PNL-80-DC Panel Mount Circuit Breaker 80 Amp Single Pole with stud terminals on the back. Ring terminals required. OutBack offers a full line of integration hardware designed to complement our power electronics products, reduce the time of...

For use in FLEXware PV and FLEXware ICS with high voltage systems Product Highlights Fuse holders are DIN rail mount with #8 AWG set-screw type compression terminals Touch-safe design Not rated for load make or load break usage For use in FLEXware...

OutBack Power PNL-100-DC Front Panel Mount Circuit Breaker 100Amp, Single pole with stud terminals on the back. Ring terminals required. OutBack offers a full line of integration hardware designed to complement our power electronics products, reduce the...

For use in FLEXware PV and FLEXware ICS with high voltage systems Product Highlights Fuse holders are DIN rail mount with #8 AWG set-screw type compression terminals Touch-safe design Not rated for load make or load break usage For use in FLEXware...

The Xantrex 100A, panel mount breaker is designed for use in the XW Power Distribution Panel. This breaker is typically used as the charge controller input breaker for the Xantrex 160A MPPT Charge Controller/Inverters.

This is a panel mount breaker. It can be mounted to the back of a panel enclosure with the mounting feet. Recommended for use with Xantrex XW Charge Controllers or Xantrex inverters through the Xantrex PDP (Power Distribution Panel) or other DC control...

This is a panel mount breaker. It can be mounted to the back of a panel enclosure with the mounting feet. Recommended for use with Xantrex XW Charge Controllers or Xantrex inverters through the Xantrex PDP (Power Distribution Panel) or other DC control...

Xantrex makes DC input safety a simple matter with our complete line of DC disconnects and breakers. The high amperage DC breaker is housed within a powder coated enclosure with conduit knockouts for SW and DR series inverter connection. Our DC...

MidNite's breakers are rated to break the full rated load at the rated voltage repeatedly, with NO DAMAGE. Always use a properly sized breaker for disconnecting. Environmental Rating - Type 1 (Indoor) DC Voltage Rating - 150VDC Wire Size Range - 14...

MidNite's breakers are rated to break the full rated load at the rated voltage repeatedly, with NO DAMAGE. Always use a properly sized breaker for disconnecting. Environmental Rating - Type 1 (Indoor) DC Voltage Rating - 150VDC Wire Size Range - 14...

All MidNite circuit breakers can be used at 100% rated current when mounted in a MidNite enclosure.Breaker Torque Value: 15 Ft-Lbs (20.4NM) Environmental Rating - Type 1 (Indoor) 125VDC Panel Mount Breaker - 3/8" studs 1.5" AIC 50,000 at...